City of Ione 2024 Consumer Confidence Report (Water System)

 

City of Ione for 2024 Consumer Confidence Report

Is my water safe?

 

We are pleased to present this year’s Annual Water Quality Report (Consumer Confidence Report) as required by the Safe Drinking Water Act (SDWA). This report is designed to provide details about where your water comes from, what it contains, and how it compares to standards set by regulatory agencies. This report is a snapshot of last year’s water quality. We are committed to providing you with information because informed customers are our best allies.

 

Do I need to take special precautions?

 

Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be particularly at risk from infections. These people should seek advice about drinking water from their health care providers. EPA/Centers for Disease Control (CDC) guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and other microbial contaminants are available from the Safe Water Drinking Hotline (800-426-4791).

 

Where does my water come from?

 

Ground Water

 

Source water assessment and its availability

 

Water is tested monthly for e Coli and Total Coliforms as required by State law. Copies of the reports are available at Ione City Hall.

 

Why are there contaminants in my drinking water?

 

Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk. More information about contaminants and potential health effects can be

 

obtained by calling the Environmental Protection Agency’s (EPA) Safe Drinking Water Hotline (800- 426-4791). The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells. As water travels over the surface of the land or through the ground, it dissolves naturally occurring minerals and, in some cases, radioactive material, and can pick up substances resulting from the presence of animals or from human activity: microbial contaminants, such as viruses and bacteria, that may come from sewage treatment plants, septic systems, agricultural livestock operations, and wildlife; inorganic contaminants, such as salts and metals, which can be naturally occurring or result from urban stormwater runoff, industrial, or domestic wastewater discharges, oil and gas production, mining, or farming; pesticides and herbicides, which may come from a variety of sources such as agriculture, urban stormwater runoff, and residential uses; organic Chemical Contaminants, including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can also come from gas stations, urban stormwater runoff, and septic systems; and radioactive contaminants, which can be naturally occurring or be the result of oil and gas production and mining activities. In order to ensure that tap water is safe to drink, EPA prescribes regulations that limit the amount of certain contaminants in water provided by public water systems. Food and Drug Administration (FDA) regulations establish limits for contaminants in bottled water which must provide the same protection for public health.

 

How can I get involved?

 

Council Meetings on Second Tuesday every Month at 6:00pm.

 

Description of Water Treatment Process

 

Your water is treated by disinfection. Disinfection involves the addition of chlorine or other disinfectant to kill dangerous bacteria and microorganisms that may be in the water. Disinfection is considered to be one of the major public health advances of the 20th century.

 

Cross Connection Control Survey

 

The purpose of this survey is to determine whether a cross-connection may exist at your home or business. A cross connection is an unprotected or improper connection to a public water distribution system that may cause contamination or pollution to enter the system. We are responsible for enforcing cross-connection control regulations and insuring that no contaminants can, under any flow conditions, enter the distribution system. If you have any of the devices listed below please contact us so that we can discuss the issue, and if needed, survey your connection and assist you in isolating it if that is necessary.

 Boiler/ Radiant heater (water heaters not included)  Underground lawn sprinkler system

 Pool or hot tub (whirlpool tubs not included)  Additional source(s) of water on the property  Decorative pond

 

 Watering trough

 

Source Water Protection Tips

 

Protection of drinking water is everyone’s responsibility. You can help protect your community’s drinking water source in several ways:

 Eliminate excess use of lawn and garden fertilizers and pesticides – they contain hazardous chemicals that can reach your drinking water source.

 Pick up after your pets.

 If you have your own septic system, properly maintain your system to reduce leaching to water sources or consider connecting to a public water system.

  Dispose of chemicals properly; take used motor oil to a recycling center.

 Volunteer in your community. Find a watershed or wellhead protection organization in your community and volunteer to help. If there are no active groups, consider starting one. Use EPA’s Adopt Your Watershed to locate groups in your community, or visit the Watershed Information Network’s How to Start a Watershed Team.

 Organize a storm drain stenciling project with your local government or water supplier. Stencil a message next to the street drain reminding people “Dump No Waste – Drains to River” or “Protect Your Water.” Produce and distribute a flyer for households to remind residents that storm drains dump directly into your local water body.

 

 

Additional Information for Lead

 

The system inventory does not include lead service lines. Blueprints of water system. Past documentation.

Lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. IONE, CITY OF is responsible for providing high quality drinking water and removing lead pipes, but cannot control the variety of materials used in plumbing components in your home. You share the responsibility for protecting yourself and your family from the lead in your home plumbing. You can take responsibility by identifying and removing lead materials within your home plumbing and taking steps to reduce your family’s risk. Before drinking tap water, flush your pipes for several minutes by running your tap, taking a shower, doing laundry or a load of dishes. You can also use a filter certified by an American National Standards Institute accredited certifier to reduce lead in drinking water. If you are concerned about lead in your water and wish to have your water tested, contact IONE, CITY OF (Public Watersystem Id: OR4100402) by calling 541-422-7414 or emailing [email protected]. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available at http://www.epa.gov/safewater/lead.

 
   

 

 

Water Quality Data Table

 

Detect

MCLG                          MCL,                             In         Range

or                            TT, or                          Your                     Sample                    Typical Contaminants      MRDLG                        MRDL                         Water Low High    Date    Violation    Source

 

In order to ensure that tap water is safe to drink, EPA prescribes regulations which limit the amount of contaminants in water provided by public water systems. The table below lists all of the drinking water contaminants that we detected during the calendar year of this report. Although many more contaminants were tested, only those substances listed below were found in your water. All sources of drinking water contain some naturally occurring contaminants. At low levels, these substances are generally not harmful in our drinking water. Removing all contaminants would be extremely expensive, and in most cases, would not provide increased protection of public health. A few naturally occurring minerals may actually improve the taste of drinking water and have nutritional value at low levels. Unless otherwise noted, the data presented in this table is from testing done in the calendar year of the report. The EPA or the State requires us to monitor for certain contaminants less than once per year because the concentrations of these contaminants do not vary significantly from year to year, or the system is not considered vulnerable to this type of contamination. As such, some of our data, though representative, may be more than one year old. In this table you will find terms and abbreviations that might not be familiar to you. To help you better understand these terms, we have provided the definitions below the table.

 
   

 

 

Microbiological Contaminants

 

 

E. coli (RTCR) – in the distribution system (positive samples)

 

 

 

00

Non detected.   

 

 

 

NA

 

 

 

NA

 

 

 

2024

 

 

 

No

 

Human and animal fecal waste

 

                     
 
   

 

 

Undetected Contaminants

The following contaminants were monitored for, but not detected, in your water.

 

 

 

 

Contaminants

MCLG

or MRDLG

MCL,

TT, or MRDL

 

Your Water

 

 

Violation

 

 

Typical Source

Bromate (ppb)

0

10

ND

No

By-product of drinking water disinfection

Dibromochloropropane (DBCP) (ppt)

0

200

ND

No

Runoff/leaching from soil fumigant used on soybeans, cotton, pineapples, and orchards

Haloacetic Acids (HAA5) (ppb)

NA

60

ND

No

By-product of drinking water chlorination

 

 

 

 

Contaminants

MCLG

or MRDLG

MCL,

TT, or MRDL

 

Your Water

 

 

Violation

 

 

Typical Source

Nitrate [measured as Nitrogen] (ppm)

10

10

ND

No

Runoff from fertilizer use; Leaching from septic tanks, sewage; Erosion of natural deposits

Nitrite [measured as Nitrogen] (ppm)

1

1

ND

No

Runoff from fertilizer use; Leaching from septic tanks, sewage; Erosion of natural deposits

TTHMs [Total Trihalomethanes] (ppb)

NA

80

ND

No

By-product of drinking water disinfection

 
   

 

 

Unit Descriptions

Term

Definition

ppm

ppm: parts per million, or milligrams per liter (mg/L)

ppb

ppb: parts per billion, or micrograms per liter (µg/L)

ppt

ppt: parts per trillion, or nanograms per liter

NA

NA: not applicable

ND

ND: Not detected

NR

NR: Monitoring not required, but recommended.

positive samples

positive samples/yr: The number of positive samples taken that year

 

Important Drinking Water Definitions

Term

Definition

MCLG

MCLG: Maximum Contaminant Level Goal: The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs allow for a margin of safety.

MCL

MCL: Maximum Contaminant Level: The highest level of a contaminant that is allowed in drinking water. MCLs are set as close to the MCLGs as feasible using the best available treatment technology.

TT

TT: Treatment Technique: A required process intended to reduce the level of a contaminant in drinking water.

AL

AL: Action Level: The concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system must follow.

Variances and Exemptions

Variances and Exemptions: State or EPA permission not to meet an MCL or a treatment technique under certain conditions.

 

MRDLG

MRDLG: Maximum residual disinfection level goal. The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants.

 

MRDL

MRDL: Maximum residual disinfectant level. The highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.

MNR

MNR: Monitored Not Regulated

MPL

MPL: State Assigned Maximum Permissible Level

 

90th Percentile

Compliance with the lead and copper action levels is based on the 90th percentile lead and copper levels. This means that the concentration of lead and copper must be less than or equal to the action level in at least 90% of the samples collected.

 
   

 

 

 

Contact Name: HASS, SHAD Address: PO BOX 361

IONE, OR 97843

Phone: 541-422-7414